Red permeable concrete floor system

Red permeable concrete floor system

Red permeable concrete floor system performance and advantages:

1, high permeability
The porosity of high-capacity art sites is 15% to 25%, and the penetration rate of concrete surface reaches 270 liters per minute, which is much higher than the discharge rate of maximum rainfall under the optimal drainage system.
2, high Bearing capacity
Red High Water Permeability Floor has a strong practicality and high environmental protection value. It has strong practical value in rainwater utilization and water pollution control work.
3, ease the urban heat island effect
The art surface with high water-bearing water penetration is a very good pavement solution that can effectively supplement groundwater and ease the urban heat island effect.
4, vacuum noise reduction
The main component of the traditional parking lot is the hydrocarbon (oil) contained in the asphalt binder of the parking lot itself. The compound is contaminated by the environment and a high-load ground car park can effectively eliminate the hazard of this pollution and its impact.
5, surface art decoration effect
The high-load bearing art floor has a strong artistic decoration and plasticity, and can realize different modeling methods, segmentation styles, and a variety of color schemes to meet the decorative styles of different environments and individual requirements.
6, high safety performance

The art scene of Gao Chengcai's permeable water has no water on rainy days, which greatly improves the safety factor of vehicles and pedestrians in driving and walking. High water-bearing water permeable art ground performance technical indicators one by one test report.

PU Plastic Runway Floor Materials,Pu Polyurethane Rubber Track,Flexible Pu Rubber Track.

Red High Water Permeability Floor System structure:

In general, 8cm is used as the reference thickness of the sidewalk, and different thicknesses are designed according to different functions. In order to reduce costs, you can use the points Layer design. For the construction of the single-layered or stratified pervious concrete pavement mentioned above, the key construction process is the guarantee of the quality of the pervious concrete pavement. Red Red High Safety Performance Floor is the construction plan for the colored pervious concrete.
1, Preparation of the Pervious Concrete Floor System before construction: Before the construction, three preparations, materials and techniques should be prepared.
(1) Organization preparation: According to the principle of completing the tasks required for the construction project, the construction project organization shall establish a sound staffing structure and staffing
We must strictly control and strive to use more than one job and one job.
(2) Material preparation: Pervious concrete construction is basically similar to cement concrete construction. The raw materials contain only a small amount of sand and a certain amount of high-grade gravel.
There is a certain amount of material (binder, high material) in the building, not aggregate. Material preparation should be site preparation, such as personnel accommodation, required water,
Establish electricity supply, engineering materials, stacking work sheds (work sheds where cementing materials need waterproofing measures), and set up the mixing machinery as a series of preparations.
The location of the mixer, the permeable concrete mixer is a small horizontal mixer. The best setting for the mixer is at the middle of the construction site.
(2) Stirring: According to the scale of the project, configure the mechanical stirrer with different capacities, and set the ground of the mechanical stirrer within a certain range to prevent water and materials from overflowing the equipment (such as square bucket buckets) to protect the construction environment and reduce hygiene. Clean up after construction. Pervious concrete can not be artificially stirred and mixed with ordinary concrete mixers. During mixing, the material is placed in the mixer in the specified proportions of the materials and the order of feeding. After mixing cement and gravel for about 30 seconds, the mixture is premixed. Add the prescribed amount of water 2-3 times and continue stirring for about 1.5-2 minutes. According to the uniform degree of stirring, the mechanical stirring time can be extended, but the stirring time should not be too long. Since pervious concrete is a kind of dry concrete, its initial setting speed is faster, so as to ensure that the transport time is as short as possible. In order to prevent the concrete from adhering to the construction site, a certain area of the lower part of the concrete should be protected by a protective plate.

(3) Pervious Concrete Floor System System, such as construction machinery, carts, bricklayer tools, etc., wood used for vertical formwork or steel products; domestic water and power facilities, domestic water and electricity, construction water, electricity and electricity for buildings : Three-phase electricity, building water: ordinary tap water connection.Medium Gray Waterborne Epoxy Resin Floor,Waterborne Epoxy Resin Floor.

Contact us if you need more details on Permeable Outdoor Flooring. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Pervious Concrete Pavement、Pervious Concrete Specifications. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Ground hardener system > Pervious Concrete Floor System