Find Mechaincal Seal Pump, SKF Bearing Pump, Chemical Dosing Pump on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Home > Products > Wheel Hub Bearing > ZLH Axial flow pump

ZLH Axial flow pump

  • ZLH Axial flow pump
  • ZLH Axial flow pump
  • ZLH Axial flow pump
  • ZLH Axial flow pump

ZLH Axial flow pump

    Payment Type: L/C,T/T
    Terms of Trade: FOB,CFR,CIF,EXW
    Min. Order: 1 Set/Sets
    Delivery Time: 60 Days
    Packaging: Wooden case or Frame steel Case
    Productivity: 1100000 sets/year
    Brand: GAOFENG
    Transportation: Ocean,Land,Air
    Place of Origin: Zigong,Sichuan,China
    Supply Ability: 110000 sets/month
    Certificate: ISO9001
    HS Code: 8413709990
    Port: Shanghai,Guangxi,Chengdu

Basic Info

Model No.: ZLH3500-511G

Product Description

ZLH Axial flow pump

This type of pump is a vertical type.Using mechanical seal pump, can be doing as SKF Bearing pump, or Chemical doisng pump.

Brief introduction

ZLH type pump is the typical vertical axial-flow pump. It applies to deliver the liquid of low head and large capacity. Its structure is tight and reasonable with convenient maintenance, wide delivering medium, such as delivering clean water, the sewage with small particles or chemical process pump with little small particles. The highest temperature of liquid can be 50.

Common material configuration table

Type

China

USA

Japan

GB/T 1220

GB/ 20878

(sectional material)

GB/T 2100(Casting)

UNS

AISI/

ASTM

ACI

(Casting)

Code

Grade

Code

Austenitic stainless steel

1Cr17Ni7

S30100

301

SUS301

0Cr19Ni9

ZG0Cr18Ni9

302

S30400

304

CF-8

SUS304

00Cr19Ni11

ZG00Cr18Ni10

301

S30403

304L

CF-3

SUS304L

0Cr17Ni12Mo2

S31600

316

CF-8M

SUS316

00Cr17Ni14Mo2

S31603

316L

CF-3M

SUS316L

0Cr18Ni11Ti

S32100

321

SUS321

00Cr20Ni25Mo4Cu

N08904

904L

Two-way stainless steel

00Cr22Ni5Mo3N

S31803

2205

00Cr25Ni7Mo4N

S32750

2507TM

0Cr26Ni5Mo2Cu3

CD4MCu

Martensitic stainless steel

0Cr13

S41000

410S

SUS410S

1Cr13

ZG1Cr13

101

S41000

410

CA-15

SUS410

2Cr13

ZG2Cr13

102

S42000

420

CA-40

SUS410J1

3Cr13

SUS410J2

1Cr13Mo

CA-15M

1Cr17Ni2

S43100

431

CB-30

SUS431

Precipitation hardening

0Cr17Ni4Cu4Nb

ZG0Cr17Ni4Cu4Nb

501

17-4PH

CB-7Cu

0Cr17Ni7AL

S17700

631

SUS631

0Cr15Ni7Mo2AL

Titanium and titanium alloy

TA2

TA10

TA9

TA9-1














































Note: The above table is a list of commonly used materials. If the required materials are not listed in the above table, please contact us.


Model description

Mechaincal Seal Pump

Pump structure features and charts

1. Structure features

ZLH type pump is made up of pump body parts and transmission parts.

The main parts of cold-out pump consist of suction pipe, bearing grinding ring, pump body, impeller, shaft, shaft bearing, sealing parts and other components. The transmission part is directly transmitted with vertical motor. (Also can use belt drive)

The main parts of salt-out pump consist of suction pipe, impeller components, positioning seat, shaft, shaft bearing and other components. The transmission part uses vertical motor or direct transmission with reducer.

The hydraulic design of impeller, considering the influence of wheel hub, rim boundary and inletwhirl, uses different design, which reduces the airfoil placing angle of wheel hub and increases the airfoil placing angle of wheel rim. After the comparative tests of several impellers, it increases the pump efficiency by a large margin and expands the range of high efficiency. Using the same impeller satisfies several customs the large quantity ranges.

Some big pumps` impellers use adjustable blade. After changing the blade installation angle, it makes the change of quantity, the highest efficiency and head of the highest efficiency point remains unchanged. It makes the impeller of same standard operate highly efficient in the larger flow range.

The original pump shaft is high-carbon steel and out part is with stainless steel against corrosion. Any place of several sealing surfaces doesn`t work that may lead medium leakage, then corrode carbon steel shaft and hard to disassemble. When use stainless steel, it has high cost, the hardness and strength can not satisfy the requirements. Now the pump shaft uses butt shaft structure (45 steel + B or M material), which makes the structure easy, handling convenient and improves the using reliability.

No need to move the inlet and outlet pipeline for this pump, can easily maintain the pump impeller and rotor parts, reduce the labor intensity and shorten the maintenance time.


Transportation:

They are packed in wooden case or steel frame case in order to long distance shipment.

SKF Bearing Pump




Sichuan Zigong Industrial Pump Co.,Ltd.

 Sichuan Zigong Industrial Pump Co., Ltd. (referred to as [ZG Pump") was founded in 1967. It is the earliest key enterprise in the production of impurity pumps and corrosion-resistant pumps. It is the largest industrial pump manufacturing based in Western China with the largest variety and specifications. The company's leading products include impurity pumps, chemical pumps, clean water pumps, hydraulic turbines and bottom-mounted propellers. There are 41 series and more than 600 varieties. The products serve petroleum, metallurgy, chemical, mining, textile and environmental protection, power and municipal facilities and other fields. The company is located in Zigong National High-tech Industrial Development Zone, covering an area of more than 400 acres. It is a pump manufacturer integrating research, production, sales and general contracting services to provide customers with the best solution for fluid transportation.

Company Info

  • Company Name: Sichuan Zigong Industrial Pump Co.,Ltd.
  • Representative: WU DEHUA
  • Product/Service: Axial pump , Chemical pump , Slurry pump , Water pump , Process pump , Industrial pump
  • Capital (Million US $): 200000000RMB
  • Year Established: 2005
  • Total Annual Sales Volume (Million US $): US$1 Million - US$2.5 Million
  • Export Percentage: 1% - 10%
  • Total Annual Purchase Volume (Million US $): Below US$1 Million
  • No. of Production Lines: 5
  • No. of R&D Staff: 31 -40 People
  • No. of QC Staff: 11 -20 People
  • OEM Services Provided: no
  • Factory Size (Sq.meters): 10,000-30,000 square meters
  • Factory Location: No.66 Jinchuan Road,Hi-tech Industrial Park,Zigong,Sichuan,China
  • Contact Person: Ms. Ivy
  • Tel: 86-813-8269991
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters