Hard Rail vertical Machining center
Basic Info
Model No.: V650/V850/V855/V1060V1165/V1270/TH5656/V1370
Product Description
The main characteristics of vertical machining center:
High rigid structureMachine tool main bulk: base, saddle, workbench, column, spindle box adopts high quality resin sand molding, high strength and high quality cast iron, has the perfect heat treatment process to eliminate residual stress, and the arrangement of the reinforcement plate enough, guarantee the machine has sufficient strength, high rigidity and stability;The use of special design guide rail base, large gauge, wide guideway, saddle no drape phenomenon within the whole trip.Full table stroke said, load power.Three axis transmission USES Taiwan grinding double nut ball screw, compact structure, smooth movement, high precision.Screw supported by Japanese imported screw support bearings, pretensioning on both ends, eliminating hot elongation accuracy loss caused.The stable high rigid mechanical transmission system;Base structure of casting water plate, waterproof properties is good.
2.Vertical Machining center-Hard Rail Center Machine
| ITEM | UNIT | V650 | V850 | V855 | V1060 |
| CAPACITY |
|
|
|
|
|
| X axis travel | mm | 600 | 800 | 850 | 1010 |
| Y axis travel | mm | 420 | 500 | 550 | 600 |
| Z axis travel | mm | 500 | 600 | 600 | 650 |
| Distance from spindle nose to table surface | mm | 150-650 | 150-750 | 150-750 | 130-780 |
| Distance from spindle nose to column surface | mm | 530 | 620 | 620 | 665 |
| WORKTABLE |
|
|
|
|
|
| Table size (LXW) | mm | 800x420 | 1050x500 | 1050x520 | 1300x600 |
| Max table load weight | kg | 500 | 650 | 700 | 1000 |
| T-solt size | mm | 3-18x125 | 5-18x100- | 5-18x100 | 5-18x120 |
| SPINDLE |
|
|
|
|
|
| Spindle speeds | rpm | 8000 | 8000 | 8000 | 8000 |
| Spindle specifications (installation dia) | mm | BT40/120 | BT40/150 | BT40/150 | BT40/150 |
| Motor power of spindle | kw | 5.5/7.5 | 7.5/11 | 7.5/11 | 7.5/11 |
| FEED SYSTEM |
|
|
|
|
|
| Rapid traverse X,Y/Z | m/min | 15 | 15 | 15 | 15 |
| Max cutting feedrate | m/min | 10 | 10 | 10 | 10 |
| A.T.C. |
|
|
|
|
|
| Tool storage capacity(Drum/Arm opt) |
| 20/24 | 20/24 | 20/24 | 20/24 |
| The larges diameter cutter knife/length | mm | 80/300 | 80/300 | 800/300 | 80/300 |
| Tool change time(T-T) | sec | 5/2.5 | 5/2.5 | 5/2.5 | 5/2.5 |
| PRECISION |
|
|
|
|
|
| Positional accuracy | mm | 0.01 | 0.01 | 0.01 | 0.012 |
| Repeatability | mm | 0.006 | 0.006 | 0.006 | 0.007 |
| MACHINE SPECIFICATIONS |
|
|
|
|
|
| Height of machine (H) | cm | 250 | 260 | 270 | 270 |
| Floor space(LXW) | cm | 2330X220 | 270X235 | 350X300 | 320X270 |
| Total Machine weight | T | 4/5 | 5.2/6.5 | 6/7 | 8/9 |
Product Categories : Machining Center > Vertical Machining Center